GENERAL INFORMATION
1
This tire changer has been specifically designed to fit and remove truck, bus and commercial agriculture and Off road tires, with rims
from
14" to 56"
and a
maximum 90” (2,300 mm) diameter.
Any other use is improper and therefore not authorized. Before beginning any kind of work on or with this machine, carefully read and
understand the contents of these operating instructions.
The Manufacturer
shall not liable for any injury to persons or damage to things caused by improper use of this machine.
KEEP THIS MANUAL NEAR THE MACHINE AND CONSULT IT AS NEEDED DURING OPERATIONS.
Any work, however minor, on the electric system must be done exclusively by professionally qualified electrician.
2
TECHNICAL DATA
3
GENERAL SAFETY REGULATIONS
The use of this machine is reserved to specially trained and authorized personnel.
Any unauthorized changes or modifications to the machine, in particular to its electric system, relieve the manifacturer from all liability
and warranty claims.
Removing or tampering with the safety devices installed on this machine is a violation of International Safety Regulations, and, as such,
once again relieves the manufacturer from all liability and warranty claims.
4
SAFETY DEVICES
The tire changer has a number of safety devices designed to guarantee the utmost operator safety:
1. Check valve on the spindle opening hydraulic line
(inside the swivel connector, see fig. B/1). This prevents the wheel from falling from
the spindle if the hydraulic line is accidentally broken.
2. Pressure relief valve factory set at 1,885 PSI (130 bar) ±10%
(See Fig. B/2).
This limits the pressure in the hydraulic circuit and ensure correct operation of the plant.
3. Pump motor overload shut-off
(inside the electric enclosure). This provides automatic shut-off for the motor to prevent damage from
overheating. This cuts in if the motor overheats to prevent it from burning out.
4. Check valve on the chuck arm lifting hydraulic line
. This prevents the chuck arm from descending when any accidental break occurs
in the hydraulic circuit.
Pump motor
Gear-box motor
Handles rim from
Max. wheel diameter
Max. wheel width
Max. wheel weight
Weight (with standard accessories)
Acoustic pressure level (at work)
2.0 HP (1.5 kw)
1.7-2.4 HP (1.3 / 1.8 kw)
14" - 56"
90” (2,300 mm)
42” (1,065 mm)
3,300 lbs (1,500 kg)
1,698 lbs (770 Kg)
LpA <70 dB (A)
Electric Power requirement
220V - 3 PH - 60Hz 15 Amp
