4137
STEP 3
STEP 1
ITEM :
Flip table over using two people to lift and flip this table.
Adjust leveler to touch the floor.
PAGE 3 OF 3
STEP 4
www.coastercompany.com
STEP 2
ASSEMBLY INSTRUCTIONS
2
1
6
DN
BN2
AN
CN
1.1 Align and fasten pedestal base (CN) to pedestal legs
(BN1 & BN2) using long bolt (2) and tighten with Allen
wrench (1).
1.2 Insert wood plug (6) to cover the open hole of pedestal
leg (BN1 & BN2).
BN1
Align and fasten mounting bar (DN) to the top of pedestal
base (CN) and leg (BN1 & BN2) using short bolt (3), lock
washer (4) and flat washer (5) and tighten with Allen wrench
(1).
3.1 Place table top (AN) upside down on soft surface.
Align and position mounting bar (DN) onto the marking at
the bottom of table top (AN). Then fasten using pan head
screw (7) and tighten with Phillips head screw driver (Not
Included).
3.2 Screw in leveler (8) to the bottom of pedestal base
(CN) and leg (BN1 &BN2).
