WEATHERPAK
®
TRx
USER’S MANUAL
P/N: 0302-109-011 Rev. B
10
2.5
Connection to a computer
a)
Plug the receiver box power cord into a power source. (110V unless otherwise marked)
b)
Plug one end of the serial data cable into the computer free COM port.
c)
Turn the receiver switch on.
d)
The receiver power indicator light should now be on.
e)
If the WEATHERPAK
is set up and running, the carrier detect light on the receiver
should blink briefly every 30 seconds as data is received. If the light doesn’t blink, see
the section on troubleshooting.
Figure 7. Computer with receiver, Display option shown
