If an update becomes available, download and save the desired Lockpick update from our website.
Make sure the module is plugged into the Lockpick harness and connected to your vehicle with the key off.
Plug in the USB cable to the Lockpick module and your computer. Then open the FIRMWARE UPDATER
program on your computer and when prompted, browse to the location you saved the desired update. Start
the update as directed in the software and do not stop the process once begun. After completion, disconnect
the USB cable, start the car and explore the installed firmware changes.
ENJOY YOUR
LOCKPICK™ !!
Available accessories to make your camera installations easy
C8RCAMKIT1
INCLUDES
MINICAM 221Color Camera
Digital Distance Markings
Standard or Mirror Image
(front or rear)
Waterproof
21’ Power and Video cable
PLUS
FACTORY RADIO CONNECTOR AND
HARNESS FOR PLUG IN
INSTALLATION
C8RCAMKIT2
INCLUDES
BARCAM 221 Color Camera
Digital Distance Markings
Standard or Mirror Image
(front or rear)
Night Vision Illumination
Waterproof
21’ Power and Video cable
PLUS
FACTORY RADIO CONNECTOR AND
HARNESS FOR PLUG IN
INSTALLATION
