1.
2.
3.
4.
Press the center button to select the desired function
.
The Lockpick instrument cluster menus will automatically time out after 10 seconds and return you to
standard vehicle information or you may press the BACK button 4x again to turn them off immediately.
Functions which have been turned on, will indicate with an asterisk next to the selection.
Lockpick Menus
Override
- ON is the default state for this Lockpick option. Select Override ON to activate the enabling
feature of the Lockpick for navigation input while in motion or DVD play while in motion. The Override
feature will remain on as long as you desire or until you return to the Override menu and turn it OFF.
View Rear
- Select VIEW REAR to manually activate and view the factory rear cam or any aftermarket
rear cam you may have installed and connected to the Lockpick wiring harness rear camera video input.
Press the center button again to turn off the rear cam and return to standard radio views.
AutoRear
- ON is the default state for this Lockpick option. It will automatically activate the rear camera
function while in reverse gear for use with an aftermarket rear view camera or to support your factory rear
view camera.
If your vehicle is not factory equipped with a rear view camera and you will not be installing
an aftermarket rear view camera, set this option to OFF
by pressing the center button on the rear of the
steering wheel. This will prevent the screen from blanking while in reverse.
SW REV XXX
– The Lockpick C8 software is equipped with the ability to be updated by the user and will
display the current software revision number while viewing this menu option.
