Coastal Bronze 50-100, Инструкция по установке

Страница: 1 / 2

Coastal Bronze 50-100 Drop Bar 7-1/2” Installation Instructions
Work required:
Arrangement is required in gate to mount this hardware to a gate or door
.
Parts for
50-100
3) DROP BAR WITH KNOB
4) KEEPER for Drop bar
5) CATCH PLATE for Drop bar
6) SCREWS--6 round head mounting screws
Tools required for mounting:
1) Electric drill
2) 1/4” diameter wood bit
3) Screw driver with blade end
4) Pencil
INSTALLATION
Gate should be hung on its hinges before installing latch. There should be between a ¼” and
1/8” vertical clearance gap between the gate and its post or frame.
The top of the Drop Bar should be set approximately
35” to 60”
from the ground depending on
personal preference.
Determine the side of the gate that swings toward you as you open the gate. This will be the
“LATCH SIDE”