Heater Voltage (Feature not used on CE rated
systems.)
Displays the operating voltage configured for the heater.
Heater Wattage as Configured in Software
Displays a heater kilowatt rating as programmed into the
control system software (1-3 or 3-6).
H _ (Heater Type)
Displays a heater type ID number.
SW _ (Dip Switch Settings)
Displays a number that represents the DIP switch
positions of S1 on the main circuit board.
PANL (Panel Version)
Displays a number of the software in the topside control
panel.
Additional Utilities,
While “INFO is on the LCD press
the Light button and GFCI should appear on the screen.
You can use the Warm or Cool button to toggle the
selection on the screen or the Light button to move to the
next menu option, option are listed below. When finished
use the light button to save your selection.
GFCI (GFCI Test)
GFCI Test is not always enabled, so it may not appear.
A / B (A/B Sensor Temperatures)
When this is set to On, the temperature display will
alternate to display temperature from Sensor A and
Sensor B in the heater.
FALT LOG (Fault Log)
The Fault Log is a record of the last 24 faults that can be
reviewed by a service tech.
DEMO (Demo Mode)
Demo Mode is not always enabled, so it may not appear.
Patio—6 Button Topside Upgrade
2021
