IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
EQUIPMENT RELATED, INSTALLATION AND GENERAL USE
Installation of all EcoClean models
When installing and using the EcoClean unit, basic safety precautions must always be followed,
including the following:
1.
Follow all aspects of the local and National Electrical Codes when installing the EcoClean
unit.
2. During installation, mount the EcoClean unit to ensure the least amount of direct exposure to
rain, garden sprinkler water, direct sunlight or any corrosive environment.
3. WARNING - Risk of electrical shock. Plug the unit into an approved G.F.C.I. electrical outlet
(110VAC ONLY).
4. WARNING - Do not use spas or hot tubs unless all suction grates are installed to prevent body
and hair entrapment.
5. DANGER - To reduce the risk of drowning from hair and body entrapment, install suction
fittings with a marked flow rate that equals or exceeds the flow rate on the equipment
assembly.
6. WARNING - Install blower no less than 30cm (1 foot) above the maximum water level to pre-
vent water from contacting electrical equipment.
7. CAUTION - Maintain water chemistry in accordance with values set out on page 5.
8. All field-installed metal components such as rails, ladders, drains, or other similar hardware
within 3m (10 feet) of the spa or hot tub shall be bonded to the equipment grounding bus with
pper conductors not smaller than No. 8 AWG in the U.S.A. and No. 6 AWG in Canada.
co
i
