Coast Spas CASCADE II 2022 Скачать руководство пользователя страница 11

Страница: 11 / 50

PUMP 2

PUMP 3

press twice

PUMP 1

seconds

START UP GUIDE

CASCADE II

PREP FOR FILLING

FILLING YOUR SPA

Using a cloth and water, wipe away any

dirt/dust collected from transport. Ensure

all jets are open by turning the face

counter clockwise.

If your spa has a Crystal Clear tube the

threaded plug needs to be on prior to

filling the spa.

Remove the filter lock ring and lid.

Remove filter and take it out of the

plastic transport bag.

Put the filter back inside and secure the

lid firmly with the locking rig. Loosen

air-bleed screw.

Place fill hose inside the spa and fill main

body of spa with water until it reaches the

infinity edge. Allow water to spill over

infinity edge for approximately 60

seconds.

Tighten air-bleed screw.

Turn power to the spa on from GFCI

breaker to activate water level gauge.

Continue filling until the water gauge

reads just below 1/2 full.

Turn power to the spa off from the GFCI

breaker for 30 seconds and then turn

back on.

Do not press the back and/or pump #1

button on the control panel. Activate high

speed on pumps 2 & 3 (if 3-pump model) or

pump 2 (if 2-pump model) by pressing the

pump buttons twice. Let run for 60 seconds.

Continue running pumps 2 & 3 (pump 2

on 2-pump models), turn pump 1 on high

speed for 20 seconds by pressing the

pump 1 icon twice.

Continue running pumps 2 & 3 (pump

2 on 2-pump models) on high speed for

30 seconds and activate pump 1 on

high speed for 20 seconds.

Cascade check valve inside the

equipment area, full of water is an

indication of no more air in the plumbing

line. If the check valve is not full of water,

air is still in the plumbing lines.

! DO NOT USE HOT WATER TO FILL YOUR SPA

! PLEASE READ ALL INSTRUCTIONS BELOW BEFORE FILLING THE SPA

IMPORTANT: Your Infinity Edge Spa will have an additional drain valve that will drain water from the reserve tank. This is separate from the main spa drain system.

! DO NOT USE WATER FROM A WATER SOFTENER

ALL PUMPS

PUMP 1

REPEAT

Repeat steps 11-12 until all air has been

removed from the system. If air is still in

the system it will precede water coming

out of the jets when pump 1 is activated.

Turn off all pumps. Then turn main power

off to the spa for 30 seconds. Then turn

power back on.

Your water level should read just

above 1/4 full on the gauge when

pump 1 (high speed) is activated.

Your hot tub is now filled. Set the

temperature and get ready to enjoy!

Release any additional trapped air by

loosening the air bleed screw. Wait for all

air to be released. Retighten.

! PLEASE READ ALL INSTRUCTIONS BELOW BEFORE FILLING THE SPA

Содержание CASCADE II 2022



















































Результаты поиска

Содержание CASCADE II 2022

Отзывы:

Похожие инструкции для CASCADE II 2022

Бренды по названию

Популярные бренды

Coast Spas CASCADE II 2022, Руководство пользователя

Результаты поиска

Содержание CASCADE II 2022

Отзывы:

Похожие инструкции для CASCADE II 2022

Бренды по названию

Популярные бренды