Sampling Data Logger User’s Manual
PAGE
11
of
17
Port
Settings
Here you can configure and activate ports that control additional accessories such as the device Modbus address.
Please call technical support for guidance and important information before making changes to the configuration
of any of these ports. You can reach us during regular business hours at
(386)
256
‐
4910
or send us a message to
.
Time/Date
Settings
Here you can change the date and time on the meter for more accurate reference on the records. The default time
of your meter could vary depending on your location.
Review
these
settings
before
you
start
using
the
meter.
Logging
Settings
Here you can change the logging interval and duration. This will enable you to collect the data for a period of time
in a specific logging interval. This screen also gives you the option to set the desired pump interval. Remember to
synchronize the pump before, during, or after the logging interval to read and collect the correct reading according
to the application.
Closed
Loop
Operation
Figure
4:
Closed
Loop
Open
Loop
with
Environmental
Exhaust
Figure
5:
Open
Loop
In order to use this meter properly, hoses/tubing must be attached to the inlet and outlet barb fittings securely.
The pump will draw air from the inlet by vacuum effect, push it to the sensing chamber through the sensor, and
then exhaust the air outside the meter through the outlet.
