WELDIING GAS ANALYZER
CM-650
5/21/2021
12 |
P a g e
May 21, 2021
U:\Documentation\Projects\CM-650\References\Manual
REV C
Date
Revision
Description
20 December, 2017
A
Initial Draft
30 December, 2019
B
Initial Release
21 May, 2021
C
Publishing, Formatting, Confirmation
Troubleshooting and Safety Precautions
DISCLAIMER: Your safety is very important to us. To ensure the proper and safe use of the
device, please ensure to read all warnings and the entire User Manual prior to using the device.
Otherwise, the protection provided by the equipment may be impaired. These warnings
provide important safety information and should be always observed.
1.
Please handle the device carefully. Do not subject the product to impact or shock, as
it could negatively affect the gas readings.
2.
Do not place the unit directly near a heat source. Heat may distort the unit.
3.
Do not touch the exposed electronic circuitry of the device under any circumstances,
as there is danger of electric shocks.
4.
Please take care of cable connections and ensure that the wires are not laid out
where an individual could fall or trip over the connectors.
Bilingual assistance can be provided by directly contacting us at
Should you come across any initial problems you may reach out directly to a support engineer.
via
Document History
