CO/Tech 18-3191, Оригинальное руководство пользователя

Страница: 5 / 44

5
EN
GL
IS
H
• Keep tools sharp and clean. Properly maintained cutting tools with sharp blades
are less likely to jam and are easier to control.
• Use the power tool, accessories and similar according to the instructions and
in an appropriate way suitable for the type of power tool used. Also take into
consideration your work environment and the type of work to be done. Using
the power tool for a purpose other than that for which it is intended could result
in a dangerous situation.
5) Service
• Repairs and service should only be performed by qualified tradesmen, and
only with original spare parts. This guarantees that the safety of the power tool
is maintained.
Specific safety instructions for multi-tools
• This electric hand tool is intended for sawing, sanding, polishing and cutting.
Read all safety warnings, instructions, illustrations, and specifications provided
with this tool. Neglecting to follow all of the instructions listed below can result in
electric shock, fire and/or serious injury.
• Do not use accessories which are not intended to be used with this tool and
which are not recommended by the manufacturer. Even if the accessory can be
attached to your power tool, there is no guarantee that it can be used safely.
• The rated speed of the accessory must at least correspond to the maximum
rated speed of the power tool. Accessories which rotate faster than their rated
speed can break and shatter.
• The outer diameter and thickness of the accessory must be within the marked
capacity of your electric hand tool. If an accessory is the wrong size, it will not fit
the guard and will not be able to be controlled properly.
• The spindle size of the wheels, flanges, and backing plates or other accessories
must fit the spindle on your power tool correctly. Ill-fitting/incorrectly sized
accessories will end up out of balance, vibrate violently, and may lead to loss
of control.
• Do not use a defective accessory. Inspect the accessory and make sure there are
no splits or cracks in the grinding wheels; cracks or wear and tear on the backing
plates, or loose or torn bristles on the steel brush wheels. If you drop your power
tool or accessory, check for damage. If the accessory is damaged, use a new/
undamaged accessory. After inspecting the tool and attaching an accessory,
keep yourself and others outside of the power tool’s danger zone and let it run
at full speed for one minute. Damaged accessories will normally break during
this test period.
• Wear personal protective equipment. Depending on how you use the machine;
use a visor/face protection or safety glasses. If necessary use a mask, ear
protection, gloves, and apron/work clothing to protect you from small shards of
metal or splinters from the work object. The eye protection you use must be able
to protect against flying debris produced in different working positions.