GARDEN BOX ASSEMBLY
2
3.1
Staple plastic sheeting along the top and bottom edge all the way
around the inside rim of the garden box. Place staples approximately
4" apart.
3.2
Trim plastic so that it reaches the top and bottom rim but does not
go over.
4.1
Set the posts in holes and back fill them with firmly compacted earth.
4.2
If burrowing pests or roots from nearby vegetation are a concern, place
hardware cloth or landscape fabric in the bottom of the box before filling
with soil.
STEP 3.
LINING
STEP 4.
INSTALLATION
3
Disclaimer:
In addition to the Terms of Use found at www.fcl.crs/contact-us/privacy-terms, you are responsible for any applicable code approval or permits associated with
the construction and use of this plan. Check with a building-code official or a building expert to make sure that the materials and construction methods shown meet local
codes and conditions and are suitable to your situation. It is the responsibility of the builder to ensure the proper tools, measurements, cuts and building techniques are used
in the construction of this plan. CO-OP
®
assumes no responsibility for the incorrect use of this information. Please ensure the manufacturer's instructions are followed in the
use of all tools and materials and heed all recommended safety guidelines.
®CO-OP and design trademark are registered trademarks of Federated Co-operatives Limited, Saskatoon S7K 3M9
