10
Component Repair
Servicing the Head, Valve Plate Assembly and Connecting Rod and Bearing Assembly
The head would only need to be replaced if it is
visibly damaged.
Component Parts Required
You will need:
Head (if damaged)
Head gasket
Valve plate O-ring
Complete valve plate assembly or individual flapper
valves.
Flapper valve screw(s) if replacing individual flapper valve(s).
Removing the Head
1
、
Disconnect the power.
2
、
Disconnect all airlines and remove compressor from the enclosure.
3
、
Remove all screws (1) that fasten the head (2) to the compressor housing.
！
Attention
If you are replacing the head and gaskets only,
see the assembly instructions on page21. To
replace the Valve flappers and connecting rod
assembly, continue to page 12
、
16.
！
4
、
Carefully separate the head from the compressor body.
5
、
Carefully separate the valve plate assemblies (4) from the heads.
6
、
Remove the head gasket O-rings (3) and replace.
7
、
Turn the valve plates over and replace the valve plate gasket O-rings (5).
