2
Care and maintenance
To ensure the long-lasting use of your adaptor wipe down with a damp cloth and use a mild soap solution if
necessary. Do not use abrasive cleaners. Always store product in a clean dry place.
Maintenance
Always check parts regularly for tightness of screws, nuts and other fasteners – tighten or replace if required. To
maintain the safety of your adaptor, seek prompt repairs for bent, torn, worn or broken parts. Use only those parts
and accessories approved by CNP Brands.
how to care for your Childcare adaptor
To remove adaptor - optional
To release the plastic adaptor from stroller, push adaptor
towards inside of stroller, then unclip. Lift out as shown in
diagram.
1.
2.
assembly/operating instructions (cont.)
Insert car seat into adaptor
Insert the Orion/Strider/Cruiser Car Seat as per car seat
manufacturer’s instructions by aligning the plastic side parts
of the car seat into the corresponding adaptor.
Push down until it sits into place.
Simultaneously swing the car seat’s handle down while
pressing both grey lever on the car seat’s side handle
moulds until it locks into position.
WARNING: Lift the Orion/Strider/Cruiser Car Seat upwards to
ensure that it’s fully engaged and locked before use.
1
2
grey lever
grey lever
To remove car seat from stroller frame
Simultaneously swing the car seat’s handle up while
pressing both grey lever on the car seat’s side handle
moulds to release the car seat.
Lift it up via the handle.
1
2
3
model # 121340-002
Folding stroller
WARNING: both plastic adaptors can remain attached to the
stroller frame when folding stroller.
Fold the stroller as per stroller manufacturer’s folding
instructions.
