Engine - Engine and crankcase
3. Upon finding a maximum wear value greater than
0.150 mm
(
0.006 in
) or maximum ovalization value
greater than
0.100 mm
(
0.004 in
) as compared to the
values in the following table, you need to replace the
cylinder liner. No grinding, facing, or reconditioning is
permitted.
4. Selection Class
• A =
135.000 - 135.012 mm
(
5.3150 - 5.3154 in
).
• B =
135.011 - 135.023 mm
(
5.3154 - 5.3159 in
).
NOTE:
The cylinder liners are supplied as spare parts with
selection class "A".
"X" - Indicates the location of the marking that designates
the selection class.
NHIL13ENG1261BA
3
5. The diagram shown in the figure gives the outside di-
ameter of the cylinder liner and the inside diameter of
its seat. The cylinder liners can, if necessary, be ex-
tracted and installed several times in different seats.
• A =
153.500 - 153.525 mm
(
6.0433 - 6.0443 in
).
• B =
152.000 - 152.025 mm
(
5.9843 - 5.9852 in
).
• C =
153.461 - 153.486 mm
(
6.0418 - 6.0428 in
).
• D =
151.890 - 151.915 mm
(
5.9799 - 5.9809 in
).
NHIL13ENG1190AA
4
47869981 01/05/2015
10.1 [10.001] / 10