CNET WNOR5305, Руководство пользователя

Страница: 15 / 69

15
CNet Global Technology Inc.
www.CNetusa.com
4.1 Prepare your PC to configure the WLAN Broadband Router
For OS of Microsoft Windows 2000/ XP:
1. Click the Start button and select Settings, then click Control Panel . The Control Panel window will appear.
2. Move mouse and double-click the right button on Network and Dial-up Connections icon. Move mouse and double-click
the Local Area Connection icon. The Local Area Connection window will appear. Click Properties button in the Local Ar-
ea Connection window.
3. Check the installed list of Network Components . If TCP/IP is not installed, click the Add button to install it; otherwise go
to step 6.
4. Select Protocol in the Network Component Type dialog box and click Add button.
5. Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK button to install the TCP/IP protocol, it
may need the Microsoft Windows CD to complete the installation. Close and go back to Network dialog box after the
TCP/IP installation.
6. Select TCP/IP and click the properties button on the Network dialog box.
7. Select Specify an IP address and type in values as following example.

IP Address: 192.168.1.2 , any IP address within 192.168.1.2 to 192.168.1.254 is good to connect the Wireless LAN
Access Point.
Don’t use 192.168.1.1.

IP Subnet Mask: 255.255.255.0
8. Click OK to complete the IP parameters setting.
For OS of Microsoft Windows Vista / 7:
1. Click the Start button and select Settings , then click Control Panel . The Control Panel window will appear.
2. Move mouse and double-click the right button on Network Connections item. The Network Connections window will
appear. Double click Local Area Connection icon, then User Account Control window shown. Right click Continue button
to set properties.
3. In Local Area Connection Properties window, Choose Network ing tab, move mouse and click Internet Protocol Version
4 (TCP/IPv4) , then click Properties button.
4. Move mouse and click General tab, Select Specify an IP address and type in values as following example.

IP Address: 192.168.1.2 , any IP address within 192.168.1.2 to 192.168.1.254 is good to connect the Wireless LAN
Access Point.
Don’t use 192.168.1.1.

IP Subnet Mask: 255.255.255.0
5. Click OK to complete the IP parameters setting.
For OS of Microsoft Windows NT:
1. Click the Start button and select Settings, then click Control Panel . The Control Panel window will appear.
2. Move mouse and double-click the right button on Network icon. The Network window will appear. Click Pro tocol tab
from the Network window.
3. Check the installed list of Network Protocol window. If TCP/IP is not installed, click the Add button to install it; othe r-
wise go to step 6.
4. Select Protocol in the Network Component Type dialog box and click Add b utton.
5. Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK button to install the TCP/IP protocol, it