CNET ColorNet ecopy, Руководство по эксплуатации

Страница: 187 / 222

Troubleshooting
179
11
Some of the registered destina-
tions are not displayed on the des-
tination list. • Check if [ All ] is displayed at the top right corner of the
“ Select destination(s). ” screen.
If another title like
[ A ]
,
[ B ]
or
[ Freq. ]
is on the screen, it
means that you have searched destinations using the
{{{{
./*
}}}}
(Title) key, and only the matched destinations are
currently available for selection. In this case, press the
{{{{
./*
}}}}
(Title) key, highlight [ All ] , and then press [ OK ] . See
p.129 “To recall all available destinations” for details.
The e-mail destinations (including
Cc destinations) are cleared when
a file name is specified. When you perform a Send Scan operation, note the follow-
ing things.
• You cannot use the following functions at the same
time:
• Scan to E-mail (referred to as “e-mail function”
here)
• Scan to Folder (SMB) (referred to as “SMB function”
here)
• Scan to FTP (referred to as “FTP function” here)
When you select [ File Name ] and then press [ Settings ] on
the screen shown above, it means that you select either
of the SMB or FTP function, and the e-mail function is
disabled. Because of this, the e-mail destinations are
cleared automatically.lSpecifying
[ To: ] , [ Cc: ] , or [ Sub-
ject ] disables the SMB or FTP function. Specifying [ SMB ]
disables the e-mail and FTP function. Specifying [ FTP ]
disables the e-mail and SMB function.
Problem Possible Cause and Required Action
www.cnet.ie