46
Item
Description
IP Address
Please enter the IP address which is provided by your ISP.
If you don’t have it, please contact your ISP.
Subnet Mask
Please enter the Subnet Mask address.
Default
Gateway
Input ISP Default Gateway Address. If you don’t know,
please check with your ISP.
MTU Size
The term
Maximum transmission unit
refers to the size
(in bytes) of the largest PDU that a given layer of a
communications protocol can pass onwards. Users can
improve network efficiency by adjusting the value of MTU.
Most of OS will give users a default value which is fit for
most of users. Users can modify this value also. Please
enter value, max number is 1500 bytes.
DNS
If ISP provides DNS information, please select
Attain DNS
automatically
. Or you should select
Set DNS Manually
,
and then input the DNS address.
3.5G Backup
The default interval between the two connection detection
is 3 minutes, and the range is from 1 to 60 minutes. Once
Internet connection is disconnected, the system
automatically connects Internet via 3.5G adapter. If 3.5G
signal is not available, it starts to search downward for
3/2.75/2.5G signals until none existed.
Clone MAC
If your ISP asks you to enter a specific MAC Address,
please input the correct info at the column.
Enable IGMP Proxy
The
Internet Group Management Protocol
(
IGMP
) is a
communication protocol used to manage the membership
of Internet Protocol multicast groups. IGMP is used by IP
hosts and adjacent multicast routers to establish multicast
group memberships. You can choose to enable
IGMP
Proxy
to provide service.
Enable Ping Access on WAN
To enable WAN ICMP response.
Enable Web Server Access on WAN
Enable Web Server Access function from WAN side.
Apply Change & Reset
Click on
Apply Changes
to save the setting data. Or you
may click on
Reset
to clear all the input data.
3
Содержание CBR-980
