18
CNet Technology Inc.
www.CNet.com.tw
a.
Static Route
Select this option to set static Routing information.
Item
Description
Destination IP
Address
This parameter specifies the IP network address of the final destination.
IP Subnet Mask
Enter the subnet mask for this destination.
Gateway IP Address
Enter the IP address of the gateway. The gateway is an immediate neighbor
of your ADSL Router that will forward the packet to the destination. On the
LAN, the gateway must be a router on the same segment as your Router;
over Internet (WAN), the gateway must be the IP address of one of the
remote nodes.
Metric
Metric represents the "cost" of transmission for routing purposes. IP Routing
uses hop count as the measurement of cost, with a minimum of 1 for directly
connected networks. Enter a number that approximates the cost for this link.
The number need not to be precise, but it must between 1 and 15. In
practice, 2 or 3 is usually a good number.
Announced in RIP
This parameter determines if the ADSL router will include the route to this
remote node in its RIP broadcasts. If set to Yes, the route to this remote
node will be propagated to other hosts through RIP broadcasts. If No, this
route is kept private and is not included in RIP broadcasts.
3.3.3
NAT
Select this option to setup the NAT (Network Address Translation) function for your ADSL
router.
