OEM installation Manual
- 5 -
and the License Agreement dialog box as shown in
Figure 2-1
will appear on the
screen. Please read all the license agreement thoroughly and select
Yes
in case
you accept the terms and conditions of the license agreement, then click
Next >
.
2.
The dialog box
Setup Type
shows as
Figure 2-2
will allow you to choose your
wanted driver, you can select the best suit your needs. It is recommended to
choose the
Install driver and Ralink WLAN Utility
, and click on the button
Next >
.
Figure 2-2 Setup Type to choose installed driver
3.
The
Setup Type
dialog box as shown in
Figure 2-3
appears on the screen, you
can choose either using
Ralink Configuration Tool
or
Microsoft Zero
Configuration Tool
to configure your new IEEE 802.11b/g/n USB WLAN
module. However, it is recommended to select
Ralink Configuration Tool
to
configure the module as it provides fully access to all functions of the module. If
you prefer to use the wireless configuration tool provided by Windows XP or
Vista, please select
Microsoft Zero Configuration Tool
. Then click
Next
to
continue.
