____________________________________________________________________________
___________________________________________________________________________
User
’s Manual Page 1
FEATURES
•
Designed for ESS AND ETHER-MACH motion controller.
•
Built-in PWM-Based Speed Control and Two Built-in Electromechanical
Relays with NO and NC positions for spindle control.
•
The system monitors:
- E-Stop.
- Safety Charge Pump.
- VFD Fault.
- Driver Fault.
•
Optoisolated inputs working at 5-24VDC.
•
Outputs can be 500mA open collector or +5vdc at 50mA TTL.
•
Buffered outputs.
•
Electromechanical Relay with NO and NC positions for general purpose
(Port_2 16 or 17, jumper-selectable).
•
Microcontroller based SCHP.
•
Can be powered with a voltage b10 and +24VDC.
•
Status LEDs on all input and Output connections.
•
DIN Rail mountable.
•
Pluggable Screw-On Terminals.
•
It is compatible with family of C34 connector boards that allow quickly
connecting to popular drives connecting not just the step and direction
signals, but also the fault and enable signals.