____________________________________________________________________________
___________________________________________________________________________
User
’s Manual Page 1
1.0 FEATURES
•
Connects directly to the motion controller or parallel ports
•
Built-in PWM-Based Speed Control and Two Built-in Electromechanical
Relays with NO and NC positions for spindle control.
•
The system monitors:
- E-Stop
- Safety Charge Pump.
•
Electromechanical Relay with NO and NC positions for general purpose
(Port_2 16 or 17, jumper-selectable).
•
Microcontroller based SCHP.
•
Optoisolated inputs working at 5-24VDC.
•
Can be powered with a voltage b10 and +30VDC.
•
Status LEDs on all input and Output connections.
•
DIN Rail mountable.
•
Open Collector Outputs pins 1, 14, 16, 17.
•
Screw-On connections for all terminals.
•
Status LEDs for enable.
