CNC STB4100, Руководство по установке

Страница: 14 / 15

Mach3 USB Motion Card STB4100 V2.1
2.6 Mach3 MPG Setup:
Note: The electronic handwheel selection 5V voltage output models, more than 5V output will
damage the hand wheel interface, refer to the following wiring diagram:
Mach3 MPG Setup:
The Mach3 Menu => Config =>Ports and Pins=>Encoder/MPG ’ S
Press the ” Tab ” key on your keyboard, to bring up the “ MPG MODE ” mach3:
Pick tick “
√
”
After setting, click "Apply" to
save the setting results