CNC STB4100, Руководство по установке

Страница: 10 / 15

Mach3 USB Motion Card STB4100 V2.1
2.2 Motor tuning setup as shown below: (Config => Motor Tuning)
2.3 The Mach3 Menu => Config => Homing/Limits dialog
：
Axis direction, depends on the “ Reversed ”
2.4
Setup the input signal
：
There are 4 general-purpose input channels. The channels number is from I1 to I4.
Example of input signal settings: I1 is connected to emergency stop switch, I2 is connected to 4 axis
limit switches, I3 is connected to 4 axis home switches, I4 is connected to auto tool zero,
set as shown
Setup each axis
1
Mach3 steps per unit:
Mach3 steps per unit = Mach3 steps per rev x Motor revs per unit
2
Velocity
3
Acceleration
Save now
5
4
Axis direction:
Depends on
”
√ ”
or
”
X
”