CNC PYTHON XPR Скачать руководство пользователя страница 6

Страница: 6 / 53

General Warnings

Contacting Support

The program does NOT have an Undo button/option. If you configure and save the wrong

values by mistake, your only option to revert to the original is to type back the original

values and save again. If you do not remember the original values or are in doubt, please

contact your CNC Factory technician for help reverting to the original settings. Using

incorrect values may cause damage to your router or make it fail.

Critical interfaces that may cause irreparable damage to your router are usually

password-protected. This password is available upon request from your CNC Factory

technician. There will be advanced segments of the program that you will not need for

your day-to-day operations and are reserved for technicians’ use only, and they will be

identified as such. Please avoid tinkering with advanced features, which may or may not

be password-protected.

Improper operations that may cause the router to fail, damage it, or cause bodily

injury to the operator are prefaced with this warning sign.

Your lifetime technical support can be accessed by calling 714-581-5999* or online via:

We will try to resolve your issue as quickly as possible via phone call or remote access. Should those not

suffice, you may contact us at 714-581-5999 to talk about an on-site visit by a technician. Separate charges

may apply.

If you do not have a Zendesk

log-in, please contact support@

cncfactory.com.

*only available during regular office hours

OPEN KNOWLEDGE CENTER

Содержание PYTHON XPR






















































Результаты поиска

Содержание PYTHON XPR

Отзывы:

Похожие инструкции для PYTHON XPR

Бренды по названию

Популярные бренды

CNC PYTHON XPR, Руководство пользователя

Результаты поиска

Содержание PYTHON XPR

Отзывы:

Похожие инструкции для PYTHON XPR

Бренды по названию

Популярные бренды