CNC-Step Zero-3, Руководство по эксплуатации

Страница: 7 / 27

Operating Instructions
Zero-3 / 5-Channel Motor Controller
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany Page 7
Support: +49 (0)2831/91021-50 12.10.2012
3
Safety measures
3 .1 O rg an iza tio na l sa fe ty me as u re s

The operating instructions must always be kept in an accessible position at the place where
the machine is being operated (in the toolbox or in a container specified for it)!

In addition to the user manual, the local general statutory or other binding regulations
governing accident prevention and environmental protection are to be observed. Pass
appropriate instructions on to operating personnel.

Instructions, including supervision and reporting responsibilities, which take account of
conditions specific to the factory, e.g. work organization, work procedures, and personnel,
must be added to the user manual.

If necessary or required by regulations, use personal protective equipment. Provide these for
operating personnel too!

At regular intervals check the safety and risk awareness of personnel and their compliance
with the operating manual!

Personnel must not wear long hair untied, loose clothing, or jewelry including rings. There
is a risk of injury, such as becoming caught in the machine.

Observe all safety and warning signs on the system at all times.

All safety and danger warning signs on the system must always be kept in a complete and
clearly legible condition.

Maintain cleanliness and good order in the area of the system!

If system operating behavior changes, switch it off immediately and report the fault to the
department or person responsible for it!

Do not make any changes, attachments or conversions to the system without permission.

Replacement parts must be in compliance with the manufacturer’s technical requirements.
Using genuine spare parts always ensures this.

Observe the schedule laid down or specified in the operating instructions for routine checks
and inspections!

Appropriate workshop equipment is essential for carrying out maintenance measures.
NOTE: The manufacturer’s documentation provided by suppliers must be
observed.
NOTE: Follow the special safety instructions in the individual chapters of this
user manual.