timeout. After setting, press SET to exit and save.
(Note: After the "3. 4. 3" operation, if the user feels unsatisfied, he can switch and
reset by pressing the " " key. Program on and program off settings are memorized
Human behavior in this process)
3. 4. 4: Password modification.
Press the "
" button,
the indicator light flashes red, enter the password to
modify the settings, first you must enter the original password, the password is 4
digits, the factory password is 1234. Password input
After the entry is correct, the "
" light flashes green, and the new password is
entered at this time. After entering the four-digit password, the " " light turns red,
and then press the "
" button to exit the indicator light is green, press the "
"
button Save Settings.
4. 4. 5: Automatic keyboard lock setting
After the automatic keyboard lock is turned on, the keyboard will be automatically
locked after 60 seconds of no operation on the panel keys. The "
" light is red.
Set automatic keyboard lock: press and hold the "
" key for 5 seconds, and the
SET light will flash red, and enter the automatic keyboard lock setting. Press the
"
" button when the indicator light is red, turn on
Turn on the automatic keyboard lock function, when it is green, turn off the
automatic keyboard lock function. Press the "
" key again to exit the setting state.
3.4.6, Rs485, Rs232 control:
This machine has RS485 and Rs232 control interfaces, which can be controlled by a
PC or a central controller. Under this control, the SET/PC indicator flashes red.
3.4.7. Manually modify or view the machine ID address operation:
Press and hold the "
" button to power on the machine again. The "
" button
is always lit red. Release the "
" button. At this time, the 8 button lights will
