manualshive.com logo in svg

CMW Ditch Witch SK350, Руководство оператора

Владельцы CMW Ditch Witch SK350 могут бесплатно скачать Руководство оператора с нашего сайта. Это исчерпывающее руководство поможет вам максимально использовать функционал вашей техники. Скачивайте руководство сейчас с manualshive.com.

Поделиться
Скачать
background image

Controls - 20

SK350 Operator’s Manual

CMW

Item

Description

Notes

1.

Throttle

To increase engine speed, 
push.

To decrease engine speed, 
pull.

Increasing engine speed also 
increases attachment speed.

NOTICE: Always stop engine at full 
throttle.

2.

Choke 

To help start cold engine, pull 
knob.

When engine has warmed, 
push in completely.

3.

Left track drive control

To move forward, push.

To move backward, pull.

To go faster in either 
direction, move control farther 
from neutral.

To stop, move to neutral.

To turn right, move left control forward 
and right control back.

To turn left, move right control forward 
and left control back.

To counter-rotate in either direction, 
move controls fully to ends in the 
directions indicated above.

4.

Right track drive 
control

To move forward, push.

To move backward, pull.

To go faster in either 
direction, move control farther 
from neutral.

To stop, move to neutral.

To turn right, move left control forward 
and right control back.

To turn left, move right control forward 
and left control back.

To counter-rotate in either direction, 
move controls fully to ends in the 
directions indicated above.

Содержание Ditch Witch SK350














































































Отзывы:

Нет отзывов

Похожие инструкции для Ditch Witch SK350

Бренды по названию

Популярные бренды

Загрузить еще бренды