GETTING TO KNOW YOUR POCKET-PRO
3
www.cmtutensili.com
Assembling your Pocket-Pro
1) If you purchased the
PPJ-001 Deluxe Set
, attach the molded
Jig Base to the Phenolic Plate using four machine screws
(provided). If you have the
PPJ-002 Set
, attach the jig to a flat
piece of plywood or your workbench. See illustrations below for
suggested dimensions. Screws should be tight enough to keep
the jig from moving on the plate, but
do not overtighten
and
damage your jig.
2) Assemble the molded Upper Jig to the Jig Base using the
two screws and knobs provided.
3) Attach the Toggle Clamp to the Phenolic Base Plate (PPJ-
001 only) or to the base you constructed in Step One using
four screws. Thread the shaft of the Clamp Tip into the body of
the Toggle Clamp.
M4 screw
Base Plate
M8 screw
Knob
Tip
M4 screws
14-3/4”
11-3/4”
4-1/16”
Mounting Holes for
Molded Jig
Mounting Holes for
Molded Jig
300mm
103,2mm
375mm
Fig. 1
Fig. 2
Fig. 3
