CMT ORANGE TOOLS CMT11, Руководство по эксплуатации

Страница: 11 / 56

11
EN
www.cmtorangetools.com
8.3.3) Sanding
The removal rate and the sanding pattern are primarily
determined by the choice of sanding sheet, the pre-set
oscillation rate and the applied pressure.
Only flawless sanding sheets achieve good sanding ca-
pacity and extend the service life of the machine.
Pay attention to apply uniform sanding pressure; this
increases the working life of the sanding sheets.
lntensifying the sanding pressure does not lead to an
increase of the sanding capacity, but to increased wear
of the machine and the sanding sheet.
For precise on-the-spot sanding of edges, corners and
hard to reach areas, it is also possible to work only with
the tip or an edge of the sanding plate.
When selectively sanding on the spot, the sanding sheet
can heat up considerably. Reduce the orbital stroke rate
and allow the sanding sheet to cool down regularly.
A sanding sheet that has been used for metal should
not be used for other materials.
8.3.4) Scraping
For scraping, select a high oscillation rate.
Work on a soft surface (e.g. wood) at a flat angle and
apply only light pressure. Otherwise the scraper can cut
into the surface.
9. CLEANING AND
MAINTENANCE
Before performing any work on the equip-
ment, pull the power plug.
• Keep the ventilation slots of the machine clean to
prevent overheating of the engine.
•
Regularly clean the machine housing with a soft
cloth, preferably after each use.
• Keep the ventilation slots free from dust and dirt.
• lf the dirt does not come off use a soft cloth mois-
tened with soapy water.
•
Never use solvents such as petrol, alcohol, ammo-
nia water, etc. These solvents may damage the plas-
tic parts.
Make sure no water can reach the inside of
the power tool!
10. TECHNICAL DETAILS
Model nr. CMT11
VoItage 220/240V
Mains frequency 50/60Hz
Power 300W
No load speed 15000-21000 min
-1
Tool weight 1,5 kg
11. NOISE
Noise emission values measured according to relevant
standard. (K=3)
Acoustic pressure level LpA 82 dB(A)
Acoustic power level LwA 93 dB(A)
ATTENTION! Wear hearing protection when
sound pressure is over 85 dB(A).
aw (Vibration) 19,7 m/s
2
K = 1,5 m/s
2
12. WARRANTY
CMT warrants to the purchaser of this product that if any
part proves to be defective due to faulty materials or work-
manship within 1 YEAR from the date of original purchase,
CMT will repair, or at its discretion replace, the faulty part
free of charge.
This warranty does not apply to commercial use nor does
it extend to normal wear and tear or damage as a result of
accident, abuse or misuse.
If the product is faulty or requires service please refer to
your nearest authorised CMT Repair Centre.
Warranty does not include any freight to and from the user.
13. ENVIRONMENT
Should your appliance need replacement
after extended use, do not dispose of it
with the household refuse, but in an envi-
ronmentally safe way.
Waste produced by electrical machine
items should not be handled like normal
household rubbish. Please recycle where recycle facili-
ties exist. Check with your Local Authority or retailer for
recycling advice.