7
5. MAINTENANCE/
TROUBLESHOOTING
5.1 FILTER MEDIA CLEANING
PROCEDURE
1.
Remove Deck Housing Lid and pull
canister out of housing.
2.
Unscrew deck canister cover and remove
sponge filter media.
3. Run low pressure water through the
sponge filter media to remove any excess
debris.
5.2 OPTIONAL ACCESSORIES
Part Number
Description
25590-250-000
CMP Pool Fitting Multi-Tool
5.3 TROUBLESHOOTING
Problem
Solution 1
Solution 2
Poor Stream Quality
Remove Deck Housing and check for leaks.
Refer to your pump manual to reduce pressure.
Poor Stream Quality
Perform filter media cleaning procedure
outlined above
-
Lights Not Working
Check power supply and controller and
verify that they are both turned on.
Check voltage at connector going into the light
module -- voltage should be 12VAC
Do not use any
detergents or cleaning chemicals to
clean the filter media.
Use water only
for cleaning the filter media.
NOTICE
FIGURE 6: FILTER MEDIA
