6
C. INSTALLATION & MAINTENANCE
• NOTE: For plug, use CMP part # 25543-000-000.
• Make sure mounting surface is level/flat. The suction cover and fitting must sit flush with the mounting surface to
prevent any gaps between the cover and the wall. Gaps between the cover and the wall may cause hair entrapment. DO
NOT over-torque the cover screw. Excessive torque can cause premature failure of threads or damage to suction fitting
increasing risk of entrapment. DO NOT USE POWER TOOLS TO INSTALL FASTENERS.
• When any SOFA component is held in place by the interior finish of the pool, that surface shall be free of deterioration
and voids.
• SOFA components and fastener receptacles shall be clean and free of debris or obstructions during installation of cover/
grate and fasteners. The use of adhesives or other attachment methods that prevent access to suction piping or SOFA
components requiring periodic servicing is prohibited. Hand-check cover/grate for snugness to the sump/ frame after
installation.
Pool W
all
Skimmer
Equalizer
To Pump Suction
IMAGE 1 - POOL/PLUMBING INSTALLATION