CMP 25207-7 Series Скачать руководство пользователя страница 3

3

A. SAFETY INSTRUCTIONS & PRECAUTIONS

When using two or more suction fittings on a common suction line, suctions must be separated by a minimum of 3 

ft or they must be located on two different planes.

WARNING: DO NOT locate suction outlets on seating areas or on backrests for such seating areas.

Attention Installer: This manual contains important information about the installation, operation and safe use of this 

product. Before installing this product, read and follow all warning notices and instructions which are included. This 

information should be given to the owner and/or operator of this equipment.

To reduce the risk of drowning from hair and body entrapment, install suction fittings with a marked flow rate in 

gallons per minute that exceeds the flow rate of your system by at least 25%. Always use multiple suction outlets.  If 

the fitting/cover breaks, is damaged, or is missing, shut the system down immediately. Do not use the system until 

damaged parts have been replaced.

Keep hair and clothing a minimum of 12 inches from all suction fittings and drains at all times. Persons with long 

hair should secure hair to a minimal length or wear swimming cap.  Children should never be left unattended at any 

time in a swimming pool, spa, or bathtub. Be sure the temperature of the water never exceeds the manufacturer’s 

recommendations.

To reduce the risk of injury, installation and service should be done by a qualified Service Professional, certified 

electrician or authorized CMP representative.

NOTE: In the event that one suction outlet is completely blocked, the remaining suction outlet(s) serving that system 

MUST have a flow rating capable of the full flow of the pump(s) for the specific suction system.

Increasing size of the pump may increase flow rate of suction beyond rated safety limits causing entrapment or 

death.

All Suction Outlet Fitting Assemblies (SOFAs) shall be installed in accordance with the manufacturer’s installation 

instructions, or for Registered Design Professional SOFAs, in accordance with the registered design professional’s 

engineering plans. Field modification made to a SOFA not authorized by the manufacturer’s installation instructions 

shall void the SOFA certification.

Hair or body parts blocking the spa or pool suctions may become trapped and held against the suction fitting. 

Entrapment against the suction fittings can result in drowning or other severe injury. Never sit on or lean up against 

suction fittings. Never exceed the maximum allowable flow rate stated on the suction fitting. The suction fitting and 

fasteners should be inspected for damage or tampering before use. Missing, broken, or cracked suction fittings shall 

be replaced. Loose suction fittings shall be reattached or replaced before use of this facility.

The maximum hose length difference between any self-contained SOFA and the tee leading to the pump shall not 

exceed 13 feet (3.96 m).

CMP drain covers are only certified for use with CMP sumps and frames.  Do not mismatch with parts from other 

manufacturers.

WARNING

WARNING

WARNING

WARNING

WARNING

NOTICE

NOTICE

NOTICE

NOTICE

NOTICE

NOTICE

NOTICE

SAVE THESE INSTRUCTIONS

When installing and using this equipment, basic safety precautions shall always be followed, including the following:

IMPORTANT SAFETY INSTRUCTIONS. 

READ, UNDERSTAND AND FOLLOW ALL WARNINGS AND INSTRUCTIONS.

 

ALWAYS PLUMB AND INSTALL ALL SUCTION FITTINGS ACCORDING TO ALL 

BUILDING CODES THAT APPLY IN YOUR AREA.

Содержание 25207-7 Series













Отзывы: