cmotion cPRO camin Скачать руководство пользователя страница 3

page 3 of 30

All content © 2019, cmotion GmbH. All specifications are subject to change without further notice.

http://www.cmotion.eu

Disclaimer

Before using the products described in this manual, be sure to read and understand all 

the respective instructions.

The cmotion cPRO camin with Software Release Package v3.0 is only available to 

commercial customers. By utilization, the customer agrees that the cPRO camin or other 

components of the system are deployed for commercial use only. Otherwise the customer 

must contact cmotion before utilization.

While cmotion endeavors to enhance the quality, reliability and safety of their products, 

customers agree and acknowledge that the possibility of defects thereof cannot be 

eliminated entirely.

To minimize the risk of damage to property or injury (including death) to persons arising 

from defects in the products, customers must incorporate sufficient safety measures in 

their work with the system and heed the stated canonic use.

cmotion or its subsidiaries do not assume any responsibility for losses incurred due to 

improper handling or configuration of the cPRO camin or other system components. 

cmotion assumes no responsibility for any errors that may appear in this document. The 

information is subject to change without notice.

For product specification changes after this manual was published, refer to the 

latest published cmotion data sheets or release notes, etc., for the most up-to-date 

specifications. Not all products and/or types are available in every country. Please check 

with a cmotion sales representative for availability and additional information.

Neither cmotion nor its subsidiaries assume any liability for infringement of patents, 

copyrights or other intellectual property rights of third parties by or arising from the 

use of cmotion products or any other liability arising from the use of such products. No 

license, express, implied or otherwise, is granted under any patents, copyrights or other 

intellectual property right of cmotion or others.

cmotion or its subsidiaries expressly exclude any liability, warranty, demand or other 

obligation for any claim, representation, cause, action, or whatsoever, express or implied, 

whether in contract or not, including negligence, or incorporated in terms and conditions, 

whether by statue, law or otherwise. In no event shall cmotion or its subsidiaries be 

liable for or have a remedy for recovery of any special, direct, indirect, incidental, or 

consequential damages, including, but not limited to lost profits, lost savings, lost 

revenues or economic loss of any kind or for any claim by a third party, downtime, good-

will, damage to or replacement of equipment or property, any cost or recovery of any 

material or goods associated with the assembly or use of our products, or any other 

damages or injury of the persons and so on or under any other legal theory.

In the event that one or all of the foregoing clauses are not allowed by applicable law, the 

fullest extent permissible clauses by applicable law are validated

Содержание cPRO camin































Отзывы: