page 17 of 30
All content © 2019, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
6.3. Setting up the cPRO camin
1. Press the lower or upper button to select the radio channel.
2. Press the lower button for six seconds to select the region you are in. Repeat this step each
time you change a region.
Note: Once the cPRO camin is connected to a cPRO or cPRO ONE hand unit, changing the
region on the hand unit will automatically change the region on the cPRO camin.
3. Press the FIZ button on each cforce motor attached for 3 seconds to start the automatic
calibration of the respective motor. Alternatively, activate the calibration process through the
cPRO or cPRO ONE hand unit (please refer to the cPRO hand unit user manual).
6.4. Connecting to the cPRO hand unit
1. Set the cPRO hand unit to the same radio channel as the cPRO camin (please refer to the
cPRO hand unit user manual). Once both units are set to the same radio channel, the two
devices will connect automatically.
2 If multiple hand units are used, please set all cPRO or cPRO ONE hand units you want to
connect to the network to the same radio channel as the cPRO camin (please refer to the cPRO
hand unit user manual). Once a hand unit is set to the same radio channel like the cPRO camin,
the device will connect automatically. Upto 2 cPRO or cPRO ONE hand units can be connected
to the cPRO camin at a time.
You are now ready to shoot.
CAUTION!
Risk of injury! Do not touch the cforce motors connected to the camin while the camin is
powered up!
This device is not intended for use by children. Keep body parts out of the motion path.
Disconnect the plug if the device is not used for a long period of time.
IEC 60417-6056 (2011-05) for other moving parts
NOTICE
To prevent the cPRO camin from falling down when detaching the camin from the cPRO
camin bracket, hold the cPRO camin with one hand while opening the cPRO camin bracket.