CMi 468 431, Руководство пользователя, Страница: 22 / 72

22
• If the power cable is damaged immediately dis-
connect the plug. Never use the device if the
power cable is damaged.
• If the device is not in use make sure the plug is
pulled out.
• Make sure that the device is switched off before
plugging in the mains cable.
• Make sure that the device is switched off before
unplugging it.
• Disconnect the power supply before transport-
ing the device.
Device-specific safety instructions
• When operating the device ensure that the area
you are working in is clean and orderly.
• When working with the device make sure the
area is well lighted.
• Make sure that flammable or explosive materials
are kept out of the immediate vicinity.
• Ensure that unauthorised persons are kept away
before putting the device into operation.
• Do not overload the device. Only use the device
for its intended purpose.
• Make sure you are positioned firmly and with a
natural stance when working with the device.
• Make sure to remove all tools from the area
(wrenches etc.) before switching on the device.
• Prevent overheating of the device and work-
piece.
• Position the power cable so that it cannot be
caught by the tool.
• Always fix/clamp in the chainsaw so that it can-
not move.
• Never grind away too much in one workstep, it is
better to use several worksteps with less grind-
ing.
• The device may only be used by one operator at
any one time.
• Ensure that, during operation, no parts of the
body, clothing or jewellery can be caught and
drawn in by the rotating components.
• Wear a hair net if you have long hair.
• Always maintain sufficient distance to the grind-
ing wheel. Wait until the grinding wheel has
come to a standstill before you remove work-
pieces, dirt etc. from the working range of the
device.
• Never leave the device running unattended.
• The device may only be operated when firmly
mounted to a workbench.
• Only use grinding wheels in perfect working
order.
• The device may only be operated in a grease-
free environment.
• The device may only be operated in a frost-free
environment.
• The rotation direction of the grinding wheel must
always correspond to the arrow marking on the
protective hood.
• After switching off the grinding wheel never slow
down with hands or objects.
• Remember that moving parts may also be
located behind ventilation and venting slots.
• Symbols affixed to your tools may not be
removed or covered. Information on the device
that is no longer legible must be replaced imme-
diately.
Residual risks
Even with proper use of the device and observance
of all safety regulations contained in these instruc-
tions, the following residual risks may occur:
• Coming into contact with the running grinding
wheel in the unprotected area.
• Kickback of workpieces and workpiece parts.
• Flying sparks are created when metal is ground.
Risk of fire! Keep persons and flammable mate-
rials away from flying sparks.
• Caution when using chainsaws. Danger of cuts!
Your device at a glance
►
P. 3, item 1
1. Handle
2. Protective hood
3. Adjustable eye protection
4. Adjusting screw for stopper
5. Fixing nut for sharpening angle
6. Scale for sharpening angle
7. Adjusting screw for sharpening depth
►
P. 3, item 2
8. Stopping cover
9. Retaining screws for eye protection
10. On/off switch
11. Base frame
12. Mounting holes
13. Retaining screw for chain
14. Chain guide
Scope of delivery
• Operating manual
• Chain sharpener
• Grinding wheel (2×)
• M8 × 45 screw
• Fixing nut
• Adjustable workpiece stopper
Read the operating manual before using
the device
Wear ear protection
Wear safety glasses
Wear a dust mask
Wear protective gloves
Pull out the power plug before conducting
any maintenance work on the device
GB
Kettenschaerfgeraet_468431.book Seite 22 Donnerstag, 1. Oktober 2015 9:03 09