4
/
17
MIDI information from the device. Next it will be converted into
Bluetooth MIDI messages and sent to other devices.
The mini TRS socket marked with
at the bottom of the interface
is to be connected to the MIDI IN of MIDI device through an optional
accessory cable. Next it will send the received Bluetooth messages
to the connected MIDI device.
The socket marked with
USB-C connects a standard 5 volts USB
power source (for example: charger, power bank, computer USB
socket, etc.). Therewith it supplies power to the WIDI Jack. This is
only necessary if the MIDI OUT socket of the MIDI device does not
supply power or when the WIDI Jack is only connected to MIDI IN
where MIDI power is not available.
The push switch on the right side of the interface is used for the
following quick operations (please confirm that the product firmware
has been upgraded to the latest version). The following operations
are based on firmware v0100 or higher:
-
When the WIDI Jack is NOT powered on, press and hold the
button. Power on the WIDI Jack until the green LED light
flashes slowly for 3 times. Then release the button. The
interface will manually reset to the factory default.