7
INSERTING THE BATTERIES
Before using the remote control, insert the batteries and programme it.
Do not leave
fl
at batteries inserted, as liquid may leak and damage the remote control
The
Control 2 Digital
remote control is a universal remote with a memory containing data regarding numerous devices
produced by different brands on the market.
Each original device has a
speci
fi
c code
which must be used to set up the remote control.
So to use the
Control 2 Digital
you
must
enter the speci
fi
c code for each device you wish to control.
So use one of the following methods to identify the correct code and set it in your remote control:
A)
- INTERNET (recommended)
B)
- CELL PHONE (SMS)
C)
- MANUAL SEARCH
SETTING CODES
If you have an Internet connection available, follow the on-line guide on the
www.cme.it
website to identify the speci
fi
c
codes for the devices you wish to command. Then set the codes manually in your
CME
remote control as described in the
ENTERING THE CODE DIRECTLY
procedure.
SETTING CODES USING INTERNET
Today, CME gives customers who don’t have internet the chance to receive the codes for programming their remote
control directly on their cell phone.
Simply send an
SMS
to this number
0039 345 7518893
as follows:
2D, Type, Brand, Model
-
[Type] = to indicate the device to be controlled using one of the following abbreviations:
TV - SAT - TER
(terrestrial
decoder).
-
[Brand, Model] = to indicate the brand and the model of the device to be controlled.
Example:
2D, TV, PHILIPS, 32PFL3614
(if you don’t know the model, don’t write anything after the brand).
Once you have received the SMS with the list of codes, set the
fi
rst code in the remote control as described in the
ENTERING THE CODE DIRECTLY
section.
SETTING CODES USING A CELL PHONE
(the service is free and the only cost is that of sending the
SMS
, which naturally depends on the rates of the service
operator in question)
The remote control requires 2 new 1.5V alkaline
AAA/LR03
batteries.
Insert them as illustrated.
Try pressing a number button and check that the red light remains lit continuously
until you release the button. If the light
fl
ashes, the batteries inserted are not charged
and are about to go
fl
at, therefore you must substitute them.
