CMC OilQSens OQ 3000, Руководство пользователя

Страница: 23 / 36

cmc Instruments GmbH 23
version 3.6-05/18
8.2 OPERATION & FUNCTION
On the next eight pages the operation and function of the WSens Software is described
in detail.
The graphical user interface of WSens is divided in two parts: the following parameters
are displayed on the left hand side of the GUI: conductivity

, dielectric constant

r
,
temperature-compensated values of the conductivity

TC
, relative permittivity

rTC
and
temperature. On the right hand side you will find more trending graphs and settings.
The x-axis of the graphs shows the time after the measurement start in minutes. The
maximum time window of each graph is 24 hours. After 24 hours the time windows
shifts correspondingly.
The software starts with the tab
settings as shown in figure 9. Here you can:
- change, open and close the COM Port, serial RS232 connection
- start and stop the recording of a measurement
- reboot the communication unit / module
- reset the temperature compensation algorithm
- change the reference temperature for the temperature compensation algorithm
- adjust the email notification settings
- adjust the limit settings of the temperature compensated data
- change the language
- close the software.
Fig. 9: WSens Software
– Settings.