USER’S MANUAL
16
Easel Tripod (raptor feet)
10’
8’
5F04
MEETS THE PORTABLE ANCHOR REQUIREMENTS OF NFPA 1983,
STANDARD ON LIFE SAFETY ROPE AND EQUIPMENT FOR EMERGENCY SERVICES, 2017
EDITION.
EMERGENCY SERVICES PORTABLE ANCHOR IN ACCORDANCE WITH NFPA 1983, 2017
EDITION.
MINIMUM BREAKING STRENGTH AND RATING ARE DETERMINED AT THE
CONFIGURATION OF LOWEST STRENGTH PER MANUFACTURER’S INSTRUCTIONS.
RATED G (GENERAL USE), MBS 36 kN FOR THE FOLLOWING CONFIGURATIONS:
VORTEX NFPA CERTIFIED CONFIGURATIONS
CONFIGURATION 1 Tripod (all legs equal
length)
1. 2 outer legs coupled to 1 inner leg at maximum
length (9 ft / 2.7 m)
2. Head unit connected to the inner leg via upper
head pin hole and last inner leg pin hole
3. Use either Raptor or Flat Feet
4. Legs at equal distance apart
5. Feet are required to be individually hobbled
or anchored
CONFIGURATION 2 Easel A-Frame
1. A-FRAME SECTION 2 outer legs coupled to1
inner leg at maximum length (8 ft / 2.4 m)
2. EASEL LEG SECTION 3 outer legs coupled to1
inner leg at maximum length (10 ft / 3.0 m)
3. A-frame head unit connected to the inner leg via
upper head pin hole and
third
to last outer leg
pin hole
4. Easel head unit connected to the inner easel leg
via third-to-last leg pin hole
5. A-frame section must be at 90 degrees relative to
the surface
6. Use either Raptor or Flat Feet
7. Easel leg to A-frame leg distance 10 ft (3 m)
8. Feet are required to be individually hobbled
or anchored
|
ARIZONA VORTEX KIT
USER MANUAL
4
