CMC ARIZONA VORTEX KIT Скачать руководство пользователя страница 31

INSPECTION RECORD

DOCUMENTATION

Model
Serial #
Year of Manufacture
Purchase Date
Date of 1st Use
User

DATE

CONDITION

INSPECTOR

If your CMC product has a defect due to workmanship or 

materials, please contact CMC Customer Support for warran-

ty information and service at [email protected].

CMC’s warranty does not cover damages caused by improper 

care, improper use, alterations and modifications, accidental 

damage or the natural breakdown of material over extended 

use and time.

CMC encourages Vortex users to maintain an inspection re-

cord that documents the information listed below. A sample 

inspection record is provided to the right.

Model

Serial Number

Year of Manufacture

Purchase Date

Date of First Use

User

Date of routine inspection

Condition at time of inspection

Inspector Name

WARRANTY

SERVICE / INFORMATION

SOLD & SUPPORTED BY

CMC

6740 Cortona Drive

Goleta, CA 93117 USA

cmcpro.com/contact-us

[email protected]

MANUFACTURED BY

Rock Exotica

Clearfield, Utah USA

MARKINGS ON THE PRODUCT 

The orange component of the Vortex head is marked as 

follows: “WARNING: For Dangerous Situations. Risk of Death/

Injury Cannot Be Eliminated. Use of this device requires spe-

cialized skills and training.” It also has the assembly date, seri-

al number and an icon reminding users to read instructions.

COUNTRY OF ORIGIN 

The Vortex is made in the USA of domestic and foreign mate-

rials. The Vortex design is patented.

MANUAL AVAILABILITY

This Vortex User Manual is also available for download at 

cmcpro.com. If you have any questions or concerns regard-

ing this product, please contact CMC Customer Support 

using the website or email address listed above.

  

|

  

cmcpro.com

31

Содержание ARIZONA VORTEX KIT

































Отзывы: