CMC Airmaster S1, Руководство по установке оборудования

Страница: 22 / 35

C.M.C. n.v. - Airmaster S1 installation guide – V1.2 – MANY0402A.00
7. Mounting of the Airmaster S1
The Airmaster S1 must be mounted in a front panel, enclosure or housing, which must
have a suitable protection degree for the electronics. The dimensions of the apertures
in the panel are given in appendix 1.
The unit can be mounted with the two mounting brackets.
The panel, enclosure or housing must have a suitable protection degree for the
electronics.
At the rear of the unit there must be enough space for cabling and connectors.
Lack of space between the unit and other devices in a
switchbox could damage the Airmaster S1.
The rear of the S1 unit should be protected against condensation. Condensation is
allowed at the front of the S1 although direct water injection should be avoided.
The rear of the S1 must also be protected against ingress of dust or other particles.
For a good visibility of the display direct sunlight on the S1 unit must be avoided.
Do not push on the screen as this could result in damage of the window and/or display.
The Airmaster S1 has an enclosure. However, for an end
product this is not enough. The OEM customer must protect
this controller with an enclosure conforming to the UL50
standard as this is mentioned in the UL508 standard.
UL
Page 22 of 35