11-2016
181GW
Quick Setup
Instructions
WARNING
: Electrical and plumbing
connections need to be made by
a qualified service person who will
comply with all available Federal, State
and Local Health, Electrical, Plumbing
and Safety codes.
6
STEP
Level dishmachine by adjusting leveling legs.
Dishmachine must be level front and back.
5
STEP
After filling dishwasher for the first time,
(CAUTION:
turn power supply off) reconnect the factory
unplugged wire to booster high-limit switch located
behind front panel.
4
STEP
If necessary adjust the temperature by turning the
adjustment stem clockwise to increase.
WASH TEMP 150°-160°
POWER
FINAL RISE TEMP 180°-195°
OFF ON
DRAIN
FILL
START
CYCLE
CHEMICAL
PUMPS
POWER
DRAIN & FILL
CYCLE
THERMOSTAT
BOOSTER
HIGH LIMIT
SWITCH
5
4
RINSE
PRESSURE
GAUGE
LEVELING LEGS
6
NOTE: To prevent Heating Element
damage, the 181GW heater must be
filled with water before the heating
element is energized. For this reason
the High Liimit Switch has
intentionally been disconnected at
the factory and will require
re-connection.
5
The Spirit of Excellence
an Ali Group Company
