11-2016
PN: 10130.00
181GW
Quick Setup
Instructions
WARNING
: Electrical and plumbing
connections need to be made by a
qualified service person who will
comply with all available Federal, State
and Local Health, Electrical,Plumbing
and Safety codes.
DRAIN HOSE
1
1
STEP
FLOOR DRAIN
1"AIR GAP
Connect the drain hose to floor drain. The floor
drain must have a 1 inch air gap between drain
hose and floor drain.
BLUE
Insert tube stiffener with chemical tubing into
corresponding chemical dispensers.
3
STEP
BLUE
RED
RED
TUBE
STIFFENER
CHEMICAL
TUBING
HARD WIRE
FOUR WIRE
POWER SUPPLY
RINSE
INJECTION
110V POWER
CONNECTION
FOR DISPENSER
NEUTRAL
HOT
GROUND
DETERGENT
INJECTION
WASH
SENSOR
WATER
LINE
RINSE
SENSOR
3
2
2
STEP
Connect dishmachine to hot water source
120°F - 140°F. Minimum temperature will remain in
wash cycle until booster heater temperature reaches
180°F, then it will advance into rinse cycle.
