5
.
Ⅱ
OPERATION INSTRUCTION:
1.
Power switch
: this switch button controls the electrical supply of the machine. If the light is on,
the machine is ready. If the be light is not on, check the electrical supply.
2.
In/Stop/Out switch
: this is switch button for three choices.
(1) Turn the button to the middle to
stop
position. The barrel would not be rotating.
(2) Turn the button to the left to
inlet
position. The barrel would be rotating. This motion would
let material go deep into the barrel.
(3) Turn the button to the right to
outlet
position. The barrel would be rotating in reverse. This
motion could let the material out from the barrel.
Note:
Remain this button at
stop
position to start your program. If the button is not at the stop position,
the program would not be started.
3.
Inhal
e: Press this button to add seasoning to your material; the machine would stop fixed
position. Connect the inhale pipe and put it into seasoning, and open the valve (on the side cover).
This would start to inhale your seasoning. When finishing, close the valve and take off the inhale
pipe, then press inhale button again. The machine would start again.
4.
Start
: Press this button to start working program.
5.
Stop
: Press this button to stop working program.
6.
Light
: When the machine is working mode, this light would be on. When the program finishes,
the light would be twinkled. When the machine breakdown or unusual, the light would be
twinkled quickly and the screen would display break down. When the problem solved, press
pause
button for relieve and machine can continue on working mode.
7.
Fixed position
: Press this button the barrel would stop in fixed position. This allows opening the
cover easily.
Note:
This button works when machine in pause or stop situation.
8.
Vacuum meter
: display inside the barrels’ vacuum data.
9.
Emergency stop
: when you press this button machine would be stop immediately.
