Controls and Indicators
5
797
Figure 13
Park Brake Handle
PARK BRAKE WARNING LIGHT
The park brake warning light (10) is located on the instrument panel just to the left of the steering column
(Figure
12)
. The warning light indicates that the park brake has been engaged. The vehicle should never be driven with the
park brake engaged. If the warning light remains on after the park brake has been fully disengaged, have a trained
technician check the vehicle.
FRONT AXLE CONTROL
The front drive unit engagement switch (3) is located to the left of the key switch
(Figure 12)
. The switch has two
positions marked 4X4 and 4X2. Push the upper half of the switch to engage the front wheel drive unit or push the
lower half of the switch to disengage the unit. The switch was designed to be used while the vehicle is in motion so
momentum is not lost while operating on slippery terrain.
See following WARNING.
WARNING
• Do not operate the vehicle on improved surfaces (concrete, asphalt, etc.) in “4X4” mode. Doing so
increases steering effort, tire wear, and shifting effort.
REAR DIFFERENTIAL LOCK CONTROL
The rear differential lock control handle (4) is located on the right side of the instrument panel
(Figure 12)
. The handle
has two positions marked DIFF with a locked padlock icon and DIFF with an unlocked padlock icon. Push the handle
up to engage the differential lock or pull the handle down to disengage the differential lock.
XRT 950 Gasoline Vehicle Owner’s Manual
Page 19
Содержание XRT 950 4x2
