Single Point Watering System (SPWS)
10
9
8
9
3
70
Figure 17
Dust Cap
71
Figure 18
Connecting Hose-end Assembly to Battery Fill
Connector
2.
The red flow indicator balls should swirl, indicating that the batteries are being filled.
See following CAUTION.
CAUTION
• If at any time water overflows from the batteries, immediately stop the refill process, disconnect the
pressure regulator from the battery fill coupling, and call for service.
3.
When the red flow indicator balls stop moving, immediately press the grey button to disconnect the regulator
from the battery fill coupling (9), and squeeze the dust cover (10) to lightly secure it to the male connector of the
battery fill coupling
(Figure 17)
.
4.
Place the battery fill coupling into the space between the battery bucket and the car body. Leaving the fill coupling
on top of the battery bank or tucked between the batteries and the battery bucket can result in coupling damage.
5.
Turn the water faucet off when finished filling the vehicle(s).
Page 42
Villager LSV Owner’s Manual
