Controls and Indicators
CONTROLS AND INDICATORS
See General Warnings on page 12.
WARNING
• Before allowing anyone to drive the vehicle, make sure the driver is familiar with all controls and
operating procedures.
• Do not tamper with the high idle speed setting on the diesel vehicle. Doing so will void the warranty,
as well as damage the engine and other components, and could result in property damage, personal
injury, or death due to unsafe speeds.
• Do not shift the Forward/Reverse handle while the vehicle is in motion.
• Engine must be at idle before shifting the Forward/Reverse handle. Failure to do so may result in
injury to inattentive passengers and (or) damage to the vehicle.
• To avoid unintentionally starting or rolling the vehicle, set the park brake, place the Forward/Reverse
handle in the NEUTRAL position, turn the key switch to the OFF position, and remove the key when
leaving the vehicle.
9
6
11
1
3
2
B
A
C
7
10
8
13
4
5
12
15
16
2741
Figure 12
Instrument Panel – Diesel Vehicles
KEY SWITCH – DIESEL VEHICLES
The key switch (7) is mounted on the instrument panel to the right of the steering column
(Figure 12)
. It has four
positions: PREHEAT, OFF, ON, and START.
Use the PREHEAT feature if the temperature falls below 23 °F (–5 °C). Do not hold the key in the PREHEAT position
longer than 20 seconds. To preheat the glow plugs in cold weather, turn the key to the PREHEAT position, and hold
it there for 10 to 15 seconds. Then turn the key to the START position, and hold it there until the engine starts. If
CARRYALL 1500/1700 CE Diesel All-Wheel Drive Owner’s Manual
Page 19
