Club Car 2008 Lynx Box Bed, Руководство пользователя

Страница: 18 / 44

Pre-Operation and Daily Safety Checklist
Page 16 2008 DS Electric Gold Standard Vehicle Owner’s Manual
PRE-OPERATION AND DAILY SAFETY CHECKLIST
Each Club Car vehicle has been thoroughly inspected and adjusted at the factory; however, upon receiving
your new vehicle(s), you should become familiar with its controls, indicators, and operation. Carefully inspect
each vehicle to ensure that it is in proper working condition before accepting delivery.
Use the following checklist as a guide to inspect the vehicle. This checklist should be used daily to ensure that
the vehicle is in proper working condition and in conjunction with the Periodic Service Schedule on page 24.
Any problems should be corrected by a Club Car distributor/dealer or a trained technician.
• General: All the parts should be in place and properly installed. Be sure that all nuts, bolts, and screws
are tight.
• Safety and information decals: Check to ensure that all safety and information decals are in place.
See Safety Decal and Feature Identification on page 4.
• Tires: Check for proper tire pressure. Visually inspect tires for wear, damage, and proper inflation on a
daily basis. See Specifications – Golf Car, 4-Passenger, and Handyman on page 35 or Specifica-
tions – Lynx 4-passenger and Box Bed Vehicle on page 36.
• Batteries: Check electrolyte to ensure that it is at the proper level (Figure 14, Page 29) . Check battery
posts. Wires should be tight and free of corrosion. On electric vehicles, charge batteries fully before
first use of vehicle.
• Charger cord, plug, and receptacle: Visually inspect for cracks, loose connections, and frayed wir-
ing. See Plug and Receptacle on page 32.
• Wiper switch: Be sure wiper switch cover is properly secured prior to operating the vehicle.
ý
WARNING
• Be sure the plastic has been removed from the seat bottom before operating the vehicle.
Failure to do so may result in a fire, property damage, personal injury, or death.
PERFORMANCE INSPECTION
After you have familiarized yourself with the vehicle controls and have read and understood the driving
instructions, take the vehicle for a test drive.
Use the following checklist as a guide to inspect the vehicle and check daily for proper operation. Any prob-
lems should be corrected by a Club Car distributor/dealer or a trained technician.
All Vehicles
• Forward/Reverse control: Check for proper operation. See Controls and Indicators on page 11.
• Brakes: Be sure the brakes function properly. When brake pedal is fully pressed under moderate pres-
sure, it should not go more than halfway to the floor, and vehicle should come to a smooth, straight
stop. If the pedal goes more than halfway to the floor, or if the vehicle swerves or fails to stop, have the
brake system checked and adjusted as required. Brake adjustment must be maintained so that the
brake pedal cannot be pressed to the floor under any circumstance.
• Park brake: When latched, the park brake should lock the wheels and hold the vehicle stationary (on
an incline of 20% or less). It should release when either the accelerator or brake pedal is pressed.
• Reverse buzzer: The reverse buzzer should sound as a warning when the Forward/Reverse handle or
switch is in the REVERSE position.
• Steering: The vehicle should be easy to steer and should not have any play in the steering wheel.